2014 Latest Pass4sure&Lead2pass HP HP0-J67 Exam Questions (91-100)

A customer experiences a sudden loss in write performance on the HP 3PAR StoreServ array on the ficantly. What should you advise the customer to check primary site. Reads are not affected, but writes slowed down signi first in order to solve the issue?

A.    replication type (if set to asynchronous periodic, set it to synchronous)
B.    Fibre Channel infrastructure and optical cabling for malfunctioning components
C.    host multi-pathing software (update it to the newest available version)
D.    replication type (if set to synchronous. set it to asynchronous periodic)

Answer: D

Which SCSI bus specification supports a maximum distance of 12 meters?

A.    Single-Ended SCSI
B.    High-Voltage Differential SCSI
C.    Serial-Attached SCSI
D.    Low-Voltage Differential SCSI

Answer: D

Your customer asks you to assist in designing a new cost effective storage solution. The solution will be used to store archive data. lt must be able to replicate point-in-time copy of data at the primary site to a remote site. The solution must provide block-level access and support Fibre Channel. There is very little rack space available at the primary site.
Which solution meets the customer requirements?

A.    HP Storevirtual
B.    HP EVA
C.    HP MSA
D.    HP 3PAR StoreServ

Answer: C

You are discussing cost reduction, quality management, and business growth with a client. According to industry best practices, which CxO are you meeting with?

A.    CEO
B.    COO
C.    CFO
D.    CIO

Answer: A

Your VMware customer has a requirement for transparent failover between campus data centers. Which HP 3PAR StoreServ feature enables the customer to fulfill this requirement?

A.    Synchronous Long Distance replication
B.    Peer Persistence
C.    One-to-One replication
D.    Port Persistence

Answer: B

A customer branch office backup and recovery strategy integrates replication using several HP StoreOnce D2D4109i in the branch offices and an HP StoreOnce D2D4312 Backup system in the main data center. After a presentation of the new HP StoreOnce Backup System and its functionalities, the customer wants to HP StoreOnce Catalyst with the HP Data Protector installation for the existing replication environment.
What has to be done to integrate this concept? (Select two.)

A.    Update existing hardware with additional RAM and drives for HP Catalyst compatibility.
B.    Propose StoreOnce Catalyst DP licenses for existing models
C.    Upgrade the backup system software to an HP StoreOnce Catalyst aware version.
D.    Trade in the branch office systems and propose HP StoreOnce 4210 Backup Systems.
E.    Recomended HP DataProtector StoreOnce replication licenses.

Answer: CE
HP StoreOnce Backup systems, G3 BBxxxA models Best practices for VTL, NAS, StoreOnce Catalyst and Replication implementations
(page 9, paragraph 2 : HP StoreOnce Catalyst stores do require a separate license on both source and target; VTL/NAS devices only require licenses if they are replication targets so we need to choose E.
page 9, topic “key features” last bullet : HP StoreOnce is only supported on HP Data Protector 7.01, Symantec NetBackup 7.x and Symantec Backup Exec 2012.
So we need to upgrade SW – C

An existing environment contains a two-node HP 3PAR StoreServ 10400 storage array with approximately 60 TB of capacity spread across three tiers. The customer plans to replicate their business critical data to a remote DR site. The customer cannot afford to lose any of this data. You propose that the customer install an HP 3PAR StoreServ 7400 Storage system at the DR site.
The CFO does not want the remote equipment to sit idle, so the customer will use that equipment for data mining. The results must be replicated back to the main site. The customer also requires that the replication of the data mining results have zero impact on the data mining performance. Which HP 3PAR technology enables the proposed solution to meet the customer requirements?

A.    Peer Motion
B.    Mixed Mode Replication
C.    Online Import
D.    Adaptive Optimization

Answer: B
A – incorrect
C – incorrect
B – correct.

You are reviewing a colleague’s design for a new storage environment. The solution consists of two HP 3PAR StoreServ arrays. The colleague also proposes an HP Multi-protocol Router Blade for the B-Series to extend the fabric. Which customer requirements should lead you to choose an HP MPX200 Multi-protocol Router as an alternative? (Select two.)

A.    need for up to 10Gbs replication bandwidth
B.    need for FCoE support
C.    need for online migrations
D.    need for fabric stability
E.    need to prioritize array replication over WANs, over less critical trafiic

Answer: AC
A – correct. HP Multi-protocol Router Blade for the B-Series supports 2 or 4 Gb SFP. very old.MPX200 supports 10Gbs
p2, topic “Key iSCSI/FCoE Features”, bullets 1-3.
B – incorrect
both support FCoE
C – correct. http://h18000.www1.hp.com/products/quickspecs/13338_div/13338_div.pdf
p3, topic “Heterogeneous Data Migration Optional License”
D – is incorrect because both devises are routers. both provide stability.
E – do not know.

You are working with a customer to design and install a Fibre Channel storage solution based on HP 3PAR StoreServ Storage. The customer wants data migration to be part of the solution. The IT environment includes VMware vSphere 5 and Windows 2008 R2 servers. The customer intends to utilize the existing non-HP array for Tier 2 storage on the Windows 2008 R2 servers. The existing array is also being used as the target of the customer backups. and that data will not be migrated. The customer wants to capitalize on their previous purchases and spend as little as possible for data migration.
What should you recommend the customer use to migrate the data? (Select two)

A.    HP 3PAR Remote Copy
B.    HP MPX200 Multifunction Router
C.    HP 3PAR Online Import
D.    HP 1606 Extension SAN Switch
E.    VMware Storage \/Motion

Answer: BE
A – incorrect – 3PAR only
C – incorrect – EVA only.
D – not sure

Your customer needs a solution to provide non-disruptive data streaming across two sites. The customer is not limited to an existing transport protocol in their environment but wants to use deduplication for their office data. Which HP storage solution should you recommend?

A.    HP StoreOnce
B.    HP EVA
C.    HP StoreEasy
D.    HP 3PAR StoreServ

Answer: D
A – incorrect. designed for backup, not for data streaming.
B – incorrect. EVA does not support deduplication
C – incorrect. try to upgrade FW. – than you need to reboot, traffic interruption occured.
D – correct. deduplication + pert persistance.

If you want to pass HP HP0-J67 successfully, donot missing to read latest lead2pass HP HP0-J67 dumps.
If you can master all lead2pass questions you will able to pass 100% guaranteed.